The Sovol SV08 and SV08 Max are among the most advanced CoreXY 3D printers available today. Based on the proven Voron 2.4 architecture, these printers combine open-source design freedom with factory-level precision. Their injection-molded structural parts replace printed Voron components, dramatically improving rigidity, alignment, and long-term reliability. With powerful accelerations and a large build volume, the SV08 platform delivers elite-class performance for makers and professionals alike.
The Missing Element – Multi-Color Printing
Despite its advanced motion system and mechanical precision, Sovol does not provide an official multi-color printing upgrade for the SV08 series. Users who want full-color capability must look beyond stock solutions — and that’s where Co Print’s KCM Set steps in.
The KCM Set is the only fully supported multi-color printing solution for the Sovol SV08 and SV08 Max, delivering automatic filament switching, synchronized color transitions, and professional-grade results — all fully integrated with Klipper firmware.
The Perfect Pair – SV08 × Co Print KCM Set
Because the SV08 already runs Klipper firmware, pairing it with the KCM Set is true kit. Co Print and Sovol have maintained an ongoing technical collaboration to ensure perfect compatibility and a smooth user experience.
- ⚙️ CoreXY mechanics + KCM Set = ideal stability and speed
- 🎨 Automatic multi-color printing with 4 or 8 filaments ($289 / $389)
- 🧩 Works seamlessly with SV08 and SV08 Max mounts – printed or factory brackets
- 🚀 Supports high accelerations up to 20 000 mm/s² without losing alignment
Why They Work So Well Together
The SV08’s rigid chassis and fast motion system allow the KCM Set to perform at its best. The CoreXY direct-drive setup of the SV08 keeps filament changes clean and synchronized. The result is brilliantly colored prints with minimal waste and excellent surface finish.
Compatibility and Ease of Installation
The KCM Set is fully compatible with both the SV08 and SV08 Max models. Printable mount files are available on the Co Print Wiki, allowing you to attach the ChromaHead and extruder assembly without losing build-plate area. Even with the multi-color upgrade installed, the SV08 retains almost its entire printing volume — a rare advantage for multi-material setups.
Quick Setup Overview
- Connect the KCM unit to the printer via USB or CAN interface.
- Mount the ChromaHead on the carriage using the SV08 bracket from Co Print Wiki.
- Attach up to 8 CX-I extruders to the KCM module.
- Update your
printer.cfgand load the Co Print macro package. - Slice a multi-color model and start printing!
Conclusion
With Co Print’s KCM Set, the Sovol SV08 and SV08 Max become high-performance multi-color printing machines. Combining precision hardware with smart automation and color control, this partnership defines what next-generation 3D printing should be — fast, stable and vivid.
Shop KCM Set Now | Visit Co Print Wiki for Mount Files and Setup Guides
