The Sovol SV07 and SV07 Plus are two of the most popular budget Klipper printers on the market. They run Klipper firmware straight out of the box, use a planetary dual gear all metal direct drive extruder, and reach print speeds up to 500 mm/s (250 mm/s recommended for the best quality). The main difference between them is size. The SV07 has a 220 x 220 x 250 mm build volume, while the SV07 Plus gives you a larger 300 x 300 x 350 mm area for bigger models and batch printing.
Both printers are single extruder machines, which means out of the box they print in a single color. The Co Print KCM Set removes that limit and turns either printer into a true multi color, multi material machine. This opens up a lot of creative and functional possibilities, from decorative prints and cosplay to labeled prototypes and personalized products.
Is the Sovol SV07 / SV07 Plus Compatible with Co Print?
Yes. Both the SV07 and the SV07 Plus are Klipper based printers, which makes them compatible with the Co Print KCM Set. Because these machines already ship with Klipper on a capable control board, you do not need any extra mini computer. The KCM connects the ChromaHead and the extruders directly to your printer's existing system, which keeps the upgrade simple and affordable.
Mechanically, the SV07 and SV07 Plus use V slot wheels running on aluminum sigma profiles for X axis motion, which is a well supported setup for the ChromaHead. Co Print does not ship one fixed metal bracket. Instead, you get a printable adapter file, so you print the mounting part sized for your exact machine and then attach the ChromaHead. This keeps the fit precise for your printer.
SV07 vs SV07 Plus: Does It Change the Upgrade?
No. The color upgrade is identical on both models. The only real difference between the SV07 and SV07 Plus is build volume, and both run the same Klipper firmware on the same class of hardware. That means both printers use the same Co Print KCM Set, and your setup process is the same. If you own the Plus, you simply get a larger area to print your multi color models.
How Many Colors Can You Print?
The KCM Set comes in two standard options, a 4 color kit and an 8 color kit, so you can choose the one that matches how you print. If you want to go further later, you can add the Extended Chroma Module (ECM) and scale all the way up to 20 different filaments in a single print. That level of multi material freedom is normally reserved for far more expensive machines.
Printable Parts and Setup
Co Print provides printable adapter files for supported printers. Rather than a one size fits all metal bracket, you download the STL and print the mounting part sized for your own machine, then install the ChromaHead. If you have any questions about parts or setup for your SV07 or SV07 Plus, our team is happy to help through the Contact page or the Help Center.
Which Co Print Set Do You Need?
Since the SV07 and SV07 Plus are Klipper based, the right product is the Co Print KCM Set. It is built specifically for Klipper printers and gives you reliable multi filament printing without adding a separate control computer.
Ready to add color to your Sovol SV07 or SV07 Plus? Get the Co Print KCM Set here and start printing in full color.
Not sure your exact model is covered? Check the full Co Print Compatible List to confirm your printer and add the right kit to your cart in one click.
Frequently Asked Questions
Can the Sovol SV07 print in more than one color?
By default the SV07 is a single extruder printer, so it prints in one color. With the Co Print KCM Set you can add multi extruder support and print in multiple colors and materials in a single job.
Do I need a Raspberry Pi or a ChromaPad for the SV07?
No. The SV07 and SV07 Plus already run Klipper on a capable control board, so they do not need a separate mini computer. The KCM connects directly to the printer's existing system, which is why the KCM Set is the right choice for these machines.
Should I buy the KCM Set or the ChromaSet for my SV07?
The KCM Set. ChromaSet is built for Marlin based printers that need a ChromaPad to run Klipper. Since the SV07 and SV07 Plus are already Klipper based, they use the KCM Set.
How many colors can I print with the KCM Set?
The KCM Set comes as a 4 color or an 8 color kit. If you want more, you can add the Extended Chroma Module and scale up to 20 different filaments in a single print.
Does the same upgrade work on the SV07 Plus?
Yes. The SV07 and SV07 Plus share the same firmware and hardware class, and the only real difference is build volume. Both use the same Co Print KCM Set with the same setup.
Will the ChromaHead fit the SV07 mechanically?
Yes. The SV07 and SV07 Plus use V slot wheels on aluminum sigma profiles for X axis motion, which is a well supported setup. Co Print provides a printable adapter file, so you print the mounting part sized for your machine and then attach the ChromaHead.
