HOW TO 7 COLOR PRINT?

After painting your model in Prusa Slicer and modifying the G-code file with the Co Print app, you can take your coloured print by following these instructions;
Co Print multi-color printing

1- Insert SD Card into The Printer

A Modified G-code file that taken from the Co Print app
should be copied to the SD card that will be used in the
3D printer.

2- Insert SD Card into Co Print

The Text file that taken from the Co Print app should be
copied to the SD card that will be used in the Co Print.

3- Insert All Filaments

Up to 7 materials, desired materials should be placed in the material deck of the Co Print. After that, insert the materials to the back of the Co Print. They should be pushed until the entrance of the 7-in-1. The material that has the first colour of your model should be inserted into the nozzle.

4- Start 3D Printer and Co Print
First, the desired file should be selected from the 3D printer, after that the same file should be selected from  the Co Print. This file can be founded inside the “Multicolour Printing” menu in the interface of Co Print.