How to Setup Co Print?

Extruder Calibration

  1. Since the extruder mechanism of your 3D Printer is now the motor and gear in Co Print and the diameter of the gear will have changed, you need to calibrate the extruder.

  2. You can reach this setting by following the steps of Control -> Motion -> E/Step -> Extruder on your 3D Printer.

  3. The result we have reached as a result of our calculations and tests is that this value is 328.0.

  4. After changing this setting to 328.0 in your own 3D Printer, you can reach a more accurate result by advancing 100 mm filament and measuring the advancing filament length (Old E/Step value *100/Measured length) by determining your own value with the formula.